Dry winter air and a sticky summer house are humidity problems, not just temperature problems. A thermostat can help only if it is wired to equipment that adds or removes moisture, or if it at least shows you the humidity so you know when to run a separate humidifier or dehumidifier.
Those are two different jobs. Humidity control means the thermostat can turn a humidifier or dehumidifier on and off. A humidity reading only puts a number on the screen. A $9 room meter can show that number too, and it cannot run the furnace. The two thermostats below are the current listings that actually deal with humidity.
The one that can control humidity equipment is this Honeywell Home X8S.
What to look for
Control or a number
Control runs a humidifier or dehumidifier. A monitor only displays the percent. Buy the feature you actually need.
The equipment
The thermostat cannot create moisture by itself. You need a humidifier on the furnace, a dehumidifier, or a model that only reports the room.
Winter versus summer
Heating dries the air. Cooling can leave a house clammy if the air conditioner is oversized and short-cycles. The right target depends on the season.
A comfortable range
Most homes feel best around 30 to 50 percent. Below that, skin and wood dry out. Above that, the house feels muggy and windows can sweat.
Top pick
A Wi-Fi thermostat with humidity control, a 5-inch touchscreen, and a room sensor. Use it when a humidifier or dehumidifier is wired into the system and you want the thermostat to run it.
Check price on AmazonThis is the thermostat to install when the furnace already has a humidifier, or a dehumidifier is part of the air handler. You set a humidity target the same way you set a temperature, and the X8S calls for the equipment. The 5-inch screen makes that target easy to read, and the sensor can watch a room other than the hallway. It also connects to Wi-Fi, so you can change the setting from your phone when the house feels dry after a cold night. Confirm the humidifier wires on the old thermostat before you order. A model with humidity control still needs those wires.
Also great
A simple non-programmable thermostat for a heat pump or a single-stage furnace. The screen shows room temperature and humidity. You run a plug-in humidifier yourself, and you change the temperature on the wall.
Check price on AmazonBuy this when you want to see how damp or dry the room is, and the heating system is straightforward. It works with a 2 heat / 1 cool heat pump or a conventional single-stage system. There is no weekly schedule and no app. That is a benefit if the last thermostat failed because nobody in the house wanted to program it. Pair it with a plug-in humidifier or dehumidifier that you switch yourself. Do not buy it expecting the thermostat to operate that appliance.
If the Bedroom Is the Problem
Humidity at the thermostat can be different from humidity in a closed bedroom. A sensor in that room is a separate feature. Those models are on smart thermostats with room sensors.
Control Versus a Number on the Screen
A humidity reading tells you the air is at 25 or 60 percent. Humidity control tells a humidifier or dehumidifier to do something about it. The thermostat cannot make moisture by itself. It only closes a circuit to equipment that is already installed on the furnace or in the duct.
Most homes feel best around 30 to 50 percent. Below that, skin, wood floors, and sinuses dry out in winter. Above that, the house feels sticky and windows sweat. Heating dries the air. An oversized air conditioner can leave it clammy because it cools the room before it has time to pull water out.
What Has to Be Wired
Look at the old thermostat for terminals marked HUM, DEHUM, or a pair of wires that went to a humidifier. If those wires are not there, a control thermostat has nothing to switch. You can still use a model that displays humidity and run a plug-in humidifier yourself. That is a useful setup. It is a different setup from one where the furnace equipment turns on by itself.
Where You Measure
The percent on the wall is the air around the thermostat. A closed bedroom can be drier or damper than the hall. If that room is the one that feels wrong, a sensor in the room tells you more than a fancier humidity menu in the hallway. The hallway number is still worth knowing before you buy a whole-house humidifier you may not need.
